Cloves Cleaning & Processing Equipment

Cloves Cleaning and Processing Equipment

Specify the incoming cloves form: whole dried cloves, broken material or powder. Select handling, cleaning and any size-reduction stages for the agreed product specification. Provide moisture condition, impurities, throughput and required output. Confirm equipment suitability using representative samples.

Related ADDAMS Equipment and Cloves Processing Guides

For inspection of suitable whole material, assess Hand Pick Selection Belt Conveyor. If the product requires milling, compare Hammer Mill Machine and Pin Mill Machine using the grinding guide. Whole roots, bark, leaves and existing powders require different feeding and size-reduction arrangements; confirm the incoming form, target particle size, hygiene and sample performance.

CLOVES PROCESSING → Cloves Intake

Assess this separation or surface-treatment duty for the actual cloves form. Define the target impurities or output and verify suitability, product damage and recovery through sample assessment.

Key functions of ADDAM Cloves Intake Equipment:

  • Receiving – Cloves is unloaded from trucks, trailers, or containers into pits, hoppers, or conveyors.

  • Initial inspection and sampling – to check for moisture, foreign materials, and overall quality.

  • Pre-cleaning (optional) – light impurities like dust and chaff may be removed at this stage.

  • Weighing and documentation – for inventory management and traceability.

  • Feeding into the processing system – via conveyors, elevators, or storage silos.

  • Cloves intake equipment ensures a consistent flow of raw material, protects downstream equipment, and serves as a critical control point for quality assurance.

Equipment: * Intake Pit (with or without Aspiration System).

Industries: * Cloves Food Processing Lines.

  • Cloves Feed Processing Lines.

  • Application: Cloves processing, subject to confirmation of incoming form and equipment suitability.

Industrial seed cleaning and processing plant interior.

CLOVES PROCESSING → Cloves Pre-Cleaning

Purpose: The ADDAMS Cloves Pre-cleaners remove coarse, fine, and light impurities from raw Cloves before it enters the central cleaning or processing stages. They act as a protective and efficiency-boosting step in the processing line.

Key objectives of ADDAMS Cloves Pre-cleaning:

  • Eliminate large foreign materials from Cloves, such as stones, sticks, leaves, and clumps.

  • Remove fine and light impurities from Cloves, like dust, sand, husks, and shriveled Cloves.

  • Reduce wear and tear on downstream machines by preventing blockages or damage.

  • Improve airflow and separation efficiency in later Cloves processes like drying or color sorting.

  • Storage stability is enhanced if Cloves is stored after intake.

  • By handling the bulk of unwanted material early, the pre-cleaner increases overall processing efficiency, protects equipment longevity, and supports consistent product quality.

Equipment: * CLOVES PRE-CLEANERS FLAT SCREEN-ECCENTRIC

Industries: * Cloves Food Processing lines.

  • Cloves Feed Processing lines.

  • Application: Cloves processing, subject to confirmation of incoming form and equipment suitability.

CLOVES PROCESSING → Cloves Drying

Purpose: The ADDAMS Cloves drying process reduces the moisture content of freshly harvested Cloves to a safe level for storage, or processing. High moisture levels can lead to rapid spoilage, mold growth, and quality loss.

Key functions of ADDAMS Cloves Drying:

  • Prevent spoilage by reducing moisture to levels that inhibit fungal and microbial activity.

  • Agree storage moisture, temperature and any drying requirement for the actual product form and storage duration. A generic grain moisture target is not a project specification.

  • Reduce weight and transport costs – dried Cloves weighs less and is less prone to damage in transit.

  • Stabilize grain quality – for consistent performance in downstream processing (e.g., milling or brewing).

  • Drying protects the Cloves’s value, usability, and shelf life after harvest.

Equipment: * RECIRCULATING BATCH TYPE DRYER

Industries: * Cloves Food Processing lines.

  • Cloves Feed Processing lines.

  • Application: Cloves processing, subject to confirmation of incoming form and equipment suitability.

CLOVES PROCESSING → Cloves Ferrous and Non-ferrous separator

Assess this separation or surface-treatment duty for the actual cloves form. Define the target impurities or output and verify suitability, product damage and recovery through sample assessment. General equipment references for separate assessment: Cloves Ferrous and Non-ferrous separator.

Key functions of the ADDAMS Ferrous & Non-Ferrous Separators for Cloves:

  • Use magnets to remove ferrous metals, such as iron or steel fragments, to prevent contamination and damage to machinery.

  • Eliminate non-ferrous metals, such as aluminium, copper, or stainless steel, using eddy current separators or advanced detection systems.

  • Protect downstream equipment from metal-induced wear, blockages, or failure.

  • Assess this separation or surface-treatment duty for the actual cloves form. Define the target impurities or output and verify suitability, product damage and recovery through sample assessment.

  • Comply with industry regulations, particularly in food-grade processing, where zero metal contamination is critical.

  • These separators are often placed early in the process line (e.g., after intake or pre-cleaning) to intercept metal contaminants as soon as possible.

Equipment:

Industries: * Cloves Food Processing lines.

  • Cloves Feed Processing lines.

  • Application: Cloves processing, subject to confirmation of incoming form and equipment suitability.

CLOVES CLEANING → Cloves Screen Cleaning

Purpose: An air screen cleaner for Cloves cleans and grades the grain by removing impurities and unwanted materials based on size and weight differences. It’s typically one of the first steps in post-harvest processing.

Key functions of an ADDAMS Air Screen Cleaner for Cloves:

  • Assess this separation or surface-treatment duty for the actual cloves form. Define the target impurities or output and verify suitability, product damage and recovery through sample assessment.

  • Separate oversized and undersized particles from Cloves with vibrating screens of different mesh/perforation sizes.

  • Assess this separation or surface-treatment duty for the actual cloves form. Define the target impurities or output and verify suitability, product damage and recovery through sample assessment.

  • Enhance Cloves storage stability by reducing the presence of mold-prone material.

  • Prepare Cloves for further processing, such as hulling, or polishing.

  • Combining aspiration (airflow) and sieving, the air screen cleaner boosts efficiency and yield while protecting downstream equipment from wear or clogging.

Equipment:

Industries: * Cloves Food Processing lines.

  • Cloves Feed Processing lines.

  • Application: Cloves processing, subject to confirmation of incoming form and equipment suitability.

CLOVES CLEANING → Cloves Seed Grading

Assess this separation or surface-treatment duty for the actual cloves form. Define the target impurities or output and verify suitability, product damage and recovery through sample assessment. General equipment references for separate assessment: Cloves grading.

Key objectives of an ADDAMS Cloves Grading:

  • Assess this separation or surface-treatment duty for the actual cloves form. Define the target impurities or output and verify suitability, product damage and recovery through sample assessment.

  • Ensure Cloves uniformity for cooking or milling.

  • Enhance Cloves process efficiency by ensuring consistent performance in polishing, drying, and dehulling.

  • Maximize Cloves value – higher-grade Cloves often commands better prices in food and brewing markets.

  • Assess this separation or surface-treatment duty for the actual cloves form. Define the target impurities or output and verify suitability, product damage and recovery through sample assessment.

  • Grading is typically performed using cylindrical or flat sieves and can be integrated with cleaning or sorting equipment.

Equipment:

Industries: * Cloves Food Processing lines.

  • Cloves Feed Processing lines.

  • Application: Cloves processing, subject to confirmation of incoming form and equipment suitability.

CLOVES CLEANING → Cloves Stone Separation

Purpose: The Addams Cloves de-stoning removes stones and other heavy impurities from the grain batch based on differences in specific density. This step is essential to protect equipment, ensure product safety, and maintain high-quality processing standards.

Key functions of Addams Cloves De-stoning:

  • Eliminate stones, glass, and metal fragments, which are heavier than Cloves and can damage downstream machinery.

  • Improve Cloves purity – especially important for food-grade Cloves.

  • Protect processing equipment, such as rollers, polishers, and sorters, from wear or breakage.

  • Enhance safety by removing foreign materials that could pose hazards to consumers.

  • Increase Cloves market value by meeting quality standards for export or premium processing.

  • De-stoners use vibrating decks with airflow to separate heavier-than-grain materials efficiently.

Equipment:

Industries: * Cloves Food Processing lines.

  • Cloves Feed Processing lines.

  • Application: Cloves processing, subject to confirmation of incoming form and equipment suitability.

CLOVES CLEANING → Cloves Gravity Separation

Assess this separation or surface-treatment duty for the actual cloves form. Define the target impurities or output and verify suitability, product damage and recovery through sample assessment. General equipment references for separate assessment: Cloves Gravity Separator.

Key functions of an ADDAMS Gravity Separator in Cloves Processing:

  • Separate high-quality Cloves from lightweight rejects, ensuring uniform kernel density.

  • This herb or spice processing application does not involve germination or planting-seed treatment. Any separate planting-material project requires its own specification.

  • Assess this separation or surface-treatment duty for the actual cloves form. Define the target impurities or output and verify suitability, product damage and recovery through sample assessment.

  • This herb or spice processing application does not involve germination or planting-seed treatment. Any separate planting-material project requires its own specification.

  • Support consistent downstream processing of Cloves, as uniform Cloves weight improves polishing, or dehulling performance.

  • Gravity separators use a combination of vibration, air flow, and sloped decks to sort the Cloves by density with high precision.

Equipment:

Industries: * Cloves Food Processing lines.

  • Cloves Feed Processing lines.

  • Application: Cloves processing, subject to confirmation of incoming form and equipment suitability.

CLOVES CLEANING → Cloves Length Separation

Assess this separation or surface-treatment duty for the actual cloves form. Define the target impurities or output and verify suitability, product damage and recovery through sample assessment. General equipment references for separate assessment: Cloves length separator.

Key functions of an ADDAMS Cloves Length Separator:

  • For cloves size reduction, specify the incoming material and required particle-size distribution. Assess suitable mills using samples, including throughput, temperature rise, dust control and product recovery.

  • Eliminate contaminants from Cloves, such as weed seeds or other grains of similar width but different length.

  • Improve Cloves uniformity – critical for consistent processing, especially in food-grade Cloves.

  • Enhance the final quality of Cloves by producing a cleaner, more homogenous grain batch.

  • This herb or spice processing application does not involve germination or planting-seed treatment. Any separate planting-material project requires its own specification.

  • Length separators often use indent cylinders or trieurs, which rotate and lift grains based on their length profile.

Equipment:

Industries: * Cloves Food Processing lines.

  • Cloves Feed Processing lines.

  • Application: Cloves processing, subject to confirmation of incoming form and equipment suitability.

CLOVES CLEANING → Cloves Color Sorting

Purpose: The ADDAMS Cloves Color Sorter separates, removes discolored, defective, or foreign grains from the bulk Cloves based on color differences. This process is essential for ensuring the final product’s quality, safety, and uniform appearance, especially in applications like food processing, or seed use.

Main purposes of the ADDAMS Cloves Color Sorting:

  • Assess this separation or surface-treatment duty for the actual cloves form. Define the target impurities or output and verify suitability, product damage and recovery through sample assessment.

  • Eliminate foreign materials from Cloves, such as stones, soil particles, or other grains.

  • Improve the visual quality of Cloves by ensuring a consistent, clean look for food grade Cloves.

  • Enhance the processing efficiency of Cloves by preventing contamination in the downstream equipment.

  • Meet industry standards – especially important for export or premium market segments.

  • Color sorters use high-resolution cameras and sensors to detect variations in color and eject unwanted particles with precise air jets.

Equipment:

Industries: * Cloves Food Processing lines.

  • Cloves Feed Processing lines.

  • Application: Cloves processing, subject to confirmation of incoming form and equipment suitability.

CLOVES CLEANING → Cloves Zig Zag Air Separator

Purpose: The ADDAMS Cloves Zig-Zag Air Separator separates materials based on weight and aerodynamic properties using a controlled air stream in a zig-zag-shaped vertical column. It effectively removes light impurities and dusty or chaffy particles from Cloves.

Key functions of the ADDAMS Zig-Zag Air Separator in Cloves processing:

  • Assess this separation or surface-treatment duty for the actual cloves form. Define the target impurities or output and verify suitability, product damage and recovery through sample assessment.

  • Improve Cloves purity before fine cleaning, grading, or packaging.

  • Protect the downstream equipment of Cloves Processing by minimizing debris that can clog or wear machinery.

  • Assess this separation or surface-treatment duty for the actual cloves form. Define the target impurities or output and verify suitability, product damage and recovery through sample assessment.

  • Support energy-efficient separation of Cloves Processing– using air flow rather than mechanical screening alone.

  • The ADDAMS Zig-Zag design increases residence time and separation efficiency, making it a compact and effective solution in pre-cleaning and aspiration systems.

Equipment:

Industries: * Cloves Food Processing lines.

  • Cloves Feed Processing lines.

  • Application: Cloves processing, subject to confirmation of incoming form and equipment suitability.

CLOVES CLEANING → Cloves Aspiration Chamber

Purpose: The ADDAMS Cloves Aspiration chamber is to separate light impurities from Cloves using airflow, improving cleanliness and protecting downstream equipment. It is commonly used in the Pre-cleaning and cleaning stages of Cloves processing.

Key functions of an ADDAMS Cloves Aspiration Chamber:

  • Remove light materials from Cloves like dust, husks, chaff, straw, and hollow grains.

  • Assess this separation or surface-treatment duty for the actual cloves form. Define the target impurities or output and verify suitability, product damage and recovery through sample assessment.

  • Protect machinery by reducing clogging and wear on fine cleaners, sorters, and other sensitive equipment.

  • Improve air quality by capturing airborne dust and reducing contamination in the facility.

  • Increase efficiency, as removing loose light particles early boosts the performance of later processing stages.

  • ADDAMS Aspiration Chambers typically use vertical or horizontal airflow to lift and separate lighter particles from heavier Cloves.

Equipment:

Industries: * Cloves Food Processing lines.

  • Cloves Feed Processing lines.

  • Application: Cloves processing, subject to confirmation of incoming form and equipment suitability.

CLOVES CLEANING → Cloves Spiral Separator

Assess this separation or surface-treatment duty for the actual cloves form. Define the target impurities or output and verify suitability, product damage and recovery through sample assessment. General equipment references for separate assessment: Cloves Spiral Separator.

Key functions of an ADDAMS Cloves Spiral Separator:

  • Assess this separation or surface-treatment duty for the actual cloves form. Define the target impurities or output and verify suitability, product damage and recovery through sample assessment.

  • Improve Cloves seed purity – particularly important for seed Cloves where uniformity and quality are critical.

  • Assess this separation or surface-treatment duty for the actual cloves form. Define the target impurities or output and verify suitability, product damage and recovery through sample assessment.

  • Reduce foreign material that might slip through a screen or air-based cleaning stages.

  • Operate without screens or air – using only gravity and mechanical flow, making it low-maintenance and energy-efficient.

  • Spiral separators rely on the principle that round grains roll down faster and more directly, while flat or irregular particles are thrown outward and fall more slowly as they descend the spiral chute.

Equipment:

Industries: * Cloves Food Processing lines.

  • Cloves Feed Processing lines.

  • Application: Cloves processing, subject to confirmation of incoming form and equipment suitability.

CLOVES PROCESSING → Cloves Abrasive Hullers

Assess this separation or surface-treatment duty for the actual cloves form. Define the target impurities or output and verify suitability, product damage and recovery through sample assessment. General equipment references for separate assessment: Cloves Abrasive Hullers.

Key functions of ADDAMS Cloves Abrasive Hullers:

  • Remove inedible Cloves hulls from hulled Cloves varieties that retain a tight outer shell after harvesting.

  • Prepare for Cloves polishing or pearling by exposing the endosperm for smoother, more uniform processing.

  • Improve Cloves’s digestibility and cooking quality for food applications like soups, cereals, or flours.

  • Enhance Cloves’s appearance by removing rough, fibrous outer layers.

  • Support food safety and cleanliness by eliminating surface contaminants trapped in the Cloves hull.

  • Abrasive hullers use rotating emery or carborundum surfaces to gently rub the hull off the Cloves as it tumbles inside the chamber.

Equipment:

Industries: * Cloves Food Processing lines.

  • Cloves Feed Processing lines.

CLOVES PROCESSING → Cloves Milling

For cloves size reduction, specify the incoming material and required particle-size distribution. Assess suitable mills using samples, including throughput, temperature rise, dust control and product recovery. General equipment references for separate assessment: Cloves Milling.

Key objectives of the ADDAMS Cloves Milling equipment:

  • Convert raw Cloves into food ingredients, such as Cloves flour, semolina, or flakes for cereals, baked goods, or soups.

  • Remove the remaining Cloves hull or bran layers for smoother texture and improved digestibility.

  • Control granulation and texture – based on end-use (e.g., Cloves fine flour vs. coarse grits).

  • Enhance Cloves’s appearance and shelf life by removing parts of the grain that may spoil more quickly.

  • Enable value-added processing, such as extrusion for snacks.

  • ADDAMS Milling equipment typically includes grinding, sieving, and sometimes polishing to achieve the desired final product quality.

Equipment:

Industries: * Cloves Food Processing lines.

  • Cloves Feed Processing lines.

CLOVES PROCESSING → Cloves Conveyors

Purpose: The ADDAMS Cloves Conveyor equipment is used in Cloves Processing Plants for efficiently and safely transporting Cloves between different processing stages, such as intake, cleaning, drying, hulling, and milling, while minimizing grain damage and maintaining flow continuity.

Key functions of ADDAMS Grain Conveyors in Cloves processing:

  • Efficient material handling – quickly move large volumes of Cloves between machines or storage.

  • Reduce manual labor – automating transport to lower labor costs and increase operational efficiency.

  • Preserve grain quality by using gentle conveying methods that reduce breakage and dust.

  • Support continuous processing – ensuring smooth transitions between processing steps without bottlenecks.

  • Enable flexible plant layout – with options like Belt Conveyors, Chain Conveyors, Screw Conveyors, or Bucket Elevators for vertical or horizontal movement.

  • ADDAMS Conveyors are essential for creating a streamlined, automated, hygienic Cloves processing operation.

Equipment:

Industries:

  • Cloves Food Processing lines.

  • Cloves Feed Processing lines.

  • Application: Cloves processing, subject to confirmation of incoming form and equipment suitability.

Separate Planting-Material Equipment References

This herb or spice processing application does not involve germination or planting-seed treatment. Any separate planting-material project requires its own specification. General equipment references for separate assessment: Cloves Seed Treater.

Separate Planting-Material Equipment References

  • This herb or spice processing application does not involve germination or planting-seed treatment. Any separate planting-material project requires its own specification.

  • This herb or spice processing application does not involve germination or planting-seed treatment. Any separate planting-material project requires its own specification.

  • This herb or spice processing application does not involve germination or planting-seed treatment. Any separate planting-material project requires its own specification.

  • Provide uniform coverage, ensuring consistent protection across all seeds.

  • This herb or spice processing application does not involve germination or planting-seed treatment. Any separate planting-material project requires its own specification.

  • ADDAMS Cloves seed treaters typically use Rotary Drums, Batch coaters, and Continuous flow Seed Treaters that mix seed with liquid or powder treatments under controlled conditions.

Equipment:

Industries:

  • Application: Cloves processing, subject to confirmation of incoming form and equipment suitability.

CLOVES PROCESSING → Cloves Polisher

Assess this separation or surface-treatment duty for the actual cloves form. Define the target impurities or output and verify suitability, product damage and recovery through sample assessment. General equipment references for separate assessment: Cloves Polisher.

Key functions of the ADDAMS Cloves polisher:

  • Assess this separation or surface-treatment duty for the actual cloves form. Define the target impurities or output and verify suitability, product damage and recovery through sample assessment.

  • Remove fine husk particles and surface dust on Cloves – improving hygiene and product quality.

  • Refine texture for cooking of Cloves – Polished Cloves has a better mouthfeel and cooks more evenly.

  • Improve the shelf life of Cloves by removing the outer layers that may spoil or attract moisture.

  • Assess this separation or surface-treatment duty for the actual cloves form. Define the target impurities or output and verify suitability, product damage and recovery through sample assessment.

  • ADDAMS Cloves polishers use Friction Polisher and Brush Polisher in a controlled chamber to gently buff the grain without damaging the core.

Equipment:

Industries:

  • Cloves Food Processing lines.

  • Cloves Feed Processing lines.

  • Application: Cloves processing, subject to confirmation of incoming form and equipment suitability.

CLOVES PROCESSING → Cloves Bagging and Packaging

Purpose: The ADDAMS Cloves Weighing and Packaging Scales in Cloves processing plants accurately weigh and dispense Cloves into bags or containers, ensuring consistent product quantity, reducing waste, and improving operational efficiency.

Key functions of packaging scales in Cloves processing:

  • Accurate weight control ensures each package contains the correct amount of Cloves (e.g., 25 kg, 50 kg, etc.).

  • Improve packaging speed and efficiency by automating the weighing and filling process.

  • Reduce product giveaway and material loss through precise measurement.

  • Maintain product consistency – important for customer satisfaction and regulatory compliance.

  • Integrate with bagging and sealing systems for a seamless packaging line.

  • ADDAMS Packaging scales can be manual, semi-automatic, or fully automatic, and are typically placed at the end of the processing line, right before storage or dispatch.

Equipment:

Industries:

  • Cloves Food Processing lines.

  • Cloves Feed Processing lines.

  • Application: Cloves processing, subject to confirmation of incoming form and equipment suitability.

CLOVES PROCESSING → Cloves Big Bag Filling & Weighing Scales

Purpose: The ADDAMS Big Bag Filling & Weighing Scales in Cloves processing plants accurately weigh and fill large-capacity bags (e.g., 500 kg to 2,000 kg) with bulk Cloves, typically for industrial, wholesale, or export applications. These systems ensure efficient handling of high-volume products with minimal labor and high precision.

Key functions of ADDAMS Big Bag Filling & Weighing in Cloves processing:

  • Accurate bulk weighing ensures each big bag contains the exact target weight of Cloves.

  • Efficient bulk packaging reduces time and labor compared to handling many smaller bags.

  • Facilitate storage and transport – big bags are easier to handle with forklifts or pallets in bulk logistics.

  • Reduce packaging waste – compared to multiple small units.

  • Support large-scale sales or exports, where Cloves is delivered in bulk to customers or processors.

  • ADDAMS Big bag scales are used at the final stage of the production line and typically include weighing platforms, filling heads, dust control, and bag-holding mechanisms.

Equipment:

Industries:

  • Cloves Food Processing lines.

  • Cloves Feed Processing lines.

  • Application: Cloves processing, subject to confirmation of incoming form and equipment suitability.

CLOVES PROCESSING → Cloves Online Scales

Purpose: The ADDAMS online scales in Cloves processing plants is to continuously monitor and control the flow of Cloves during processing by providing real-time weight measurements. These scales ensure accuracy in batching, blending, yield tracking, and process optimization without interrupting the production line.

Key functions of ADDAMS Online scales in Cloves processing:

  • Continuous, real-time weight monitoring for material moving on conveyors or through chutes.

  • Ensure consistent flow rates for evenly feeding machines like dryers, cleaners, or polishers.

  • Track yield and losses by comparing input and output weights at different processing stages.

  • Enable automatic process control – systems can adjust flow or equipment settings based on live weight data.

  • Support production reporting and traceability, with accurate logs for quality assurance and audits.

  • ADDAMS Online scales (also called in-line or dynamic scales) are typically integrated into belt conveyors, screw feeders, or pneumatic lines for seamless operation.

Equipment:

Industries:

  • Cloves Food Processing lines.

  • Cloves Feed Processing lines.

  • Application: Cloves processing, subject to confirmation of incoming form and equipment suitability.

CLOVES PROCESSING → Cloves PALLETISER

Purpose: The ADDAMS Palletiser automates the stacking of filled bags or containers onto pallets in Cloves processing plants, improving efficiency, consistency, and safety in the final packaging and dispatch stage.

Key functions of the ADDAMS Palletiser in Cloves processing:

  • Automated stacking reduces manual labor and speeds up packaging.

  • Ensure uniform pallet loads – optimizing space for storage and transport.

  • Improve workplace safety by minimizing heavy lifting and repetitive strain on workers.

  • Enhance handling and logistics – neatly stacked pallets are easier to move with forklifts or pallet jacks.

  • Increase throughput – allowing continuous operation with minimal downtime in the final stage.

  • ADDAMS Palletisers can be robotic, layer-forming, or gantry-type, typically used after bagging and sealing machines.

Equipment:

  • BAG STACKER PALLETISER

Industries:

  • Cloves Food Processing lines.

  • Cloves Feed Processing lines.

  • Application: Cloves processing, subject to confirmation of incoming form and equipment suitability.

CLOVES PROCESSING → Cloves Indoor Silos

Purpose: The ADDAMS Indoor Silos in Cloves processing plants is to provide safe, controlled, and efficient storage of Cloves at various stages of processing—typically before or after cleaning, drying, or packaging.

Key functions of ADDAMS Indoor silos in Cloves processing:

  • Buffer storage – maintain a steady flow between processing stages to avoid downtime.

  • Protect grain from weather and pests by storing it in a sealed, climate-controlled environment.

  • Enable batch separation – store different grades, varieties, or processing lots separately.

  • Support logistics and automation – with integrated loading/unloading systems for efficient material handling.

  • Preserve grain quality – with options for aeration, temperature monitoring, and humidity control.

  • ADDAMS Indoor silos are usually made of steel or food-grade coated materials and are located within or adjacent to processing facilities for fast and hygienic access.

Equipment:

Industries:

  • Cloves Food Processing lines.

  • Cloves Feed Processing lines.

  • Application: Cloves processing, subject to confirmation of incoming form and equipment suitability.

CLOVES PROCESSING → Cloves Processing Plant Control & Automation

Purpose: The ADDAMS Plant Control & Automation; PLC, SCADA, and MES systems in Cloves processing plants is to automate, monitor, and optimize the entire production process, ensuring efficiency, quality control, traceability, and real-time decision-making.

ADDAMS PLC (Programmable Logic Controller)

  • Purpose: Controls individual machines or systems (like dryers, conveyors, cleaners) with precision and reliability.

  • Key Functions: Real-time control of motors, valves, sensors; responds quickly to operational changes; ensures consistent operation.

ADDAMS SCADA (Supervisory Control and Data Acquisition)

  • Purpose: Provides centralized monitoring and control over all plant operations.

  • Key Functions: Visual dashboards (temperatures, flow rates); alarm management; remote control of equipment; data logging for audits.

ADDAMS MES (Manufacturing Execution System)

  • Purpose: Manages and optimizes production workflows, tracking, and reporting across the plant.

  • Key Functions: Tracks raw material to finished product (traceability); monitors efficiency (OEE); schedules batches; connects data with ERP.

Equipment:

Industries:

  • Cloves Food Processing lines.

  • Cloves Feed Processing lines.

  • Application: Cloves processing, subject to confirmation of incoming form and equipment suitability.

CLOVES PROCESSING → Cloves Processing Plant Seed & Air Flow Piping

Purpose: The ADDAMS Seed and Airflow piping in a Cloves processing plant efficiently and gently transports Cloves and removes impurities using controlled air movement and enclosed piping systems. This method helps maintain product integrity, reduce contamination, and automate material flow between machines.

Key Functions of ADDAMS Seed & Air Flow Piping:

  • Assess this separation or surface-treatment duty for the actual cloves form. Define the target impurities or output and verify suitability, product damage and recovery through sample assessment.

  • Efficient Impurity Removal – Airflow piping systems help separate and carry away light materials like dust, husk, or chaff.

  • Reduce Cross-Contamination – Enclosed pipes prevent foreign matter from entering during grain transfer.

  • Improve Plant Hygiene – Closed systems reduce dust in the facility, supporting better air quality.

  • Enable Automation & Continuous Flow – Connects different processing machines without manual intervention.

  • Save Space – Overhead or vertical piping optimizes the layout in compact facilities.

Equipment:

Industries:

  • Cloves Food Processing lines.

  • Cloves Feed Processing lines.

  • Application: Cloves processing, subject to confirmation of incoming form and equipment suitability.

CLOVES PROCESSING → Cloves Processing Plant Aspiration Systems

Assess this separation or surface-treatment duty for the actual cloves form. Define the target impurities or output and verify suitability, product damage and recovery through sample assessment. General equipment references for separate assessment: Fans in a Cloves.

Key Functions of ADDAMS Aspiration in Cloves Processing:

  • Remove lightweight impurities – Separates non-grain material lighter than Cloves.

  • Enhance product purity – Delivers cleaner Cloves for food or seed use.

  • Improve machine performance – Prevents clogging and wear on downstream machines.

  • Support hygienic processing – Reduces dust levels in the plant for worker safety.

  • Lower risk of mold or spoilage – Removing organic residues helps control moisture.

  • Enable energy-efficient cleaning – Air is used instead of mechanical sorting for specific impurities.

Equipment:

Industries:

  • Cloves Food Processing lines.

  • Cloves Feed Processing lines.

  • Application: Cloves processing, subject to confirmation of incoming form and equipment suitability.

CLOVES PROCESSING → Cloves Processing Plant Air Filter Systems

Purpose: The ADDAMS air filters in a Cloves processing plant is to clean and purify the air used in various processes, ensuring dust control, equipment protection, and hygienic working conditions throughout the facility.

Key Functions of ADDAMS Air Filter Systems:

  • Remove dust and airborne particles – Captures fine-grain dust and husk debris.

  • Improve air quality – Ensures a safer, healthier environment for workers.

  • Protect equipment – Prevents dust build-up in blowers and electronic systems.

  • Maintain product hygiene – Minimizes foreign particles settling on processed Cloves.

  • Support compliance – Helps meet safety and food-grade standards (OSHA, HACCP, ISO).

  • Reduce explosion risk – Filtering dust reduces the chance of dust-related fires.

Equipment:

Industries:

  • Cloves Food Processing lines.

  • Cloves Feed Processing lines.

  • Application: Cloves processing, subject to confirmation of incoming form and equipment suitability.

Less waste, higher yield, more innovative solutions. The future of agriculture.

Processes

ADDAMS helps plan grain, seed and natural-product processing systems around the incoming material and the required finished product. Cleaning, grading, separation, drying and material handling stages are selected according to crop characteristics, impurities, throughput and site conditions. Sample evaluation helps assess separation quality and usable product recovery before the line configuration is agreed.

Explore optical seed sorting and seed density separation, or discuss your processing requirements with ADDAMS.

Request Your Custom Quote Today!

Tell us your product, target capacity and processing requirements. Our team can help you select suitable equipment.

Request a Custom Quote